 |
C67300 Round Bar| 2- 1/2 "OD x 12"L
- WEIGHT|20#
- Typically ships from NJ
EXCELLENT WEAR RESISTANCE FOR BUSHINGS, GEAR BLANKS, AND HYDRAULIC PUMP COMPONENTS, C673 Leaded Silicon-Manganese Bronze has excellent corrosion resistance and high strength with the ability to operate at high speeds and under heavy loads. Typical Industry Applications: Screws, fasteners and bearings for sleeve, thrust and clutch applications, Marine hardware, Shaft bushings, pump parts, seal rings, spindles, idler pins, drive shafts, piston heads, Cold formed parts such as wear plates, gears, cams connecting rods.
- H02 Temper (Half Hard)
- Material Origin: India or South Africa
- Chemical Certifications Included w/ the order (By Request)
Alternative Alloy Names
- SAE| J461, J463,
- CDA 673
- UNS| C67300
- AMS (if applicable)|
Ingot#| N/A
Foreign / Overseas Alloy Names (if applicable)
- British|
- German| CuNi18Zn19Pb1
Typical Properties (not to be used for specification purposes)Chemical Composition
- CuNi18Zn19Pb1
- Copper <-> 58.0-63.0%
- Tin <-> 0.30%
- Lead <-> 0.40-3.00%
- Zinc <-> Balance
- Aluminum <-> 0.25%
- Iron <-> 0.10%
- Nickel <-> 0.25%
- Magnesium <-> 2.00-3.50%
- Silicon <-> .050-1.5%
Minimum Physical Properties
- Density| 0.293
- Tensile Strength, PSI| 75000
- Yield Strength, PSI| 55000
- Elongation in 2" &| 0.15
- Brinell| 3000KG LOAD|153
- Machinability | 70
Minimum Operating Temperature
Maximum Operating Temperature
N/A
|
|
|
Bronze Shaft 
